Swant

  

国别：瑞士Swant

Swant  产品

 

• 抗Ca2 +结合蛋白的抗体 Swant
• 抗Ca2 +通道，Ca2 +交换剂和Ca2 +泵的抗体 Swant
• 抗胰岛素样生长因子的抗体 Swant
• 针对神经递质的抗体 Swant
• 针对肾素 - 血管紧张素系统组分的抗体 Swant
• 其他抗体 Swant
• 纯化蛋白 Swant

 

 

Antibodies to Calbindin D-28k, Calretinin, Parvalbumin, Calmodulin and to Na2+-Ca2+-exchangers, Ca2+ channels subunits, Ca2+ pumps, neurotransmitters, as well as their respective antigens.

Superb staining of subpopulation of neurons or glial cells in various species, including humans. Selective staining of various types of cancers.

Our mono- and polyclonal antibodies are of high titer and of high specificity. They can be used in immunohistochemistry and immunoblots at dilution of more than 1:5'000 (Avidin-Biotin-Method). The recombinant antigens have been purified by HPLC.

The products are supplied in lyophilized form and are accompanied by detailed product description. Method sheets can be found on this web-page.

 

 

Swant  Procedure for the immunolabelling of sections with rabbit antisera

 

Material

 

Free-floating cryostate or vibratome sections (40-80 µm) of fixed tissue* (4% paraformaldehyde in 0.1 M phosphate buffer, pH 7.4) or paraffin sections (3-5 µm) of tissue fixed with 10% unbuffered formalin.

0.1M Tris-buffered saline (TBS) pH 7.3.

SWant rabbit antiserum.

Biotinylated anti-rabbit IgG.

Streptavidin-peroxidase or Streptavidin conjugated to CY2, Cy3, Cy5, or other fluorescent dyes.

Peroxidase substrate (e.g. Diaminobenzidine(HCl) and H2O2).

Ethanol and Xylol.

Mounting medium (e.g. Eukitt for immunhistochemistry, Hydromount for immunofluorescence).

Method

 

Apply the SWant rabbit-antiserum diluted 1:1'000-1:5'000 (paraffin sections) or 1:5'000-1:10'000 (floating sections) in TBS with 10% carrier serum (e.g. calf or horse serum) and eventually 0.2% Triton-X 100 (particularly for vibratome sections). Incubate for 1 to 3 days at 4°C (on a shaker for free-floating sections, in a humid chamber for paraffin sections).

Rinse in TBS 3 x 5 min.

Apply biotinylated anti-rabbit IgG-biotin (diluted according to the suggestions of the supplier) in TBS with 10% carrier serum. Incubate at room temperature (RT) for 1 to 4 hours.

Rinse in TBS 3 x 5 min.

Apply the streptavidine-biotin-peroxidase complex (diluted according to the suggestions of the supplier) or the Streptavidine-fluorescent complex in TBS with 10% carrier serum. Incubate for 1 to 2 hours at RT.

Rinse in TBS 3 x 5 min.

The immunofluorescent labelling is terminated at this point and the section can be mounted on slides and coverslipped with an aqueous medium (e.g. Hydromount).

The immunohistochemical reaction is concluded by treating the section with a peroxidase substrate (e.g. Diaminobenzidine HCl / H2O2 ) under continuous microscopic observation.

Rinse in TBS 3 x 5 min.

Mount free floating sections on slides, eventually counterstain with cresyl-violet.

Dehydrate immunohistochemically treated sections with ethanol and xylol. Add mounting medium (Eukitt) and coverslip.

Note : in case of excessive background-staining, use higher dilutions of the SWant rabbit antiserum.

 

* Without prior fixation the highly soluble Ca2+-binding proteins are immediately lost during sectioning.

 

 

Procedure for the immunolabelling of sections with goat antisera

 

Swant  Material

 

Free-floating cryostate or vibratome sections (40-80 µm) of fixed tissue* (4% paraformaldehyde in 0.1 M phosphate buffer, pH 7.4) or paraffin sections (3-5 µm) of tissue fixed with 10% unbuffered formalin.

0.1M Tris-buffered saline (TBS) pH 7.3.

SWant goat antiserum.

Biotinylated anti-goat IgG.

Streptavidin-peroxidase or Streptavidin conjugated to CY2, Cy3, Cy5, or other fluorescent dyes.

Peroxidase substrate (e.g. Diaminobenzidine(HCl) and H2O2).

Ethanol and Xylol.

Mounting medium (e.g. Eukitt for immunhistochemistry, Hydromount for immunofluorescence).

Method

 

Apply the SWant goat-antiserum diluted 1:1'000-1:5'000 (paraffin sections) or 1:5'000-1:10'000 (floating sections) in TBS with 10% carrier serum (e.g. calf or horse serum) and eventually 0.2% Triton-X 100 (particularly for vibratome sections). Incubate for 1 to 3 days at 4°C (on a shaker for free-floating sections, in a humid chamber for paraffin sections).

Rinse in TBS 3 x 5 min.

Apply biotinylated anti-goat IgG-biotin (diluted according to the suggestions of the supplier) in TBS with 10% carrier serum. Incubate at room temperature (RT) for 1 to 4 hours.

Rinse in TBS 3 x 5 min.

Apply the streptavidine-biotin-peroxidase complex (diluted according to the suggestions of the supplier) or the Streptavidine-fluorescent complex in TBS with 10% carrier serum. Incubate for 1 to 2 hours at RT.

Rinse in TBS 3 x 5 min.

The immunofluorescent labelling is terminated at this point and the section can be mounted on slides and coverslipped with an aqueous medium (e.g. Hydromount).

The immunohistochemical reaction is concluded by treating the section with a peroxidase substrate (e.g. Diaminobenzidine HCl / H2O2 ) under continuous microscopic observation.

Rinse in TBS 3 x 5 min.

Mount free floating sections on slides, eventually counterstain with cresyl-violet.

Dehydrate immunohistochemically treated sections with ethanol and xylol. Add mounting medium (Eukitt) and coverslip.

Note: in case of excessive background-staining use higher dilutions of the SWant goat antiserum.

 

* Without prior fixation the highly soluble Ca2+-binding proteins are immediately lost during sectioning.

 

 

 

 

Swant  Procedure for the immunolabelling of sections with mouse monoclonal antibodies

 

Material

 

Free-floating cryostate or vibratome sections (40-80 µm) of fixed tissue* (4% paraformaldehyde in 0.1 M phosphate buffer, pH 7.4) or paraffin sections (3-5 µm) of tissue fixed with 10% unbuffered formalin.

0.1M Tris-buffered saline (TBS) pH 7.3.

SWant monoclonal mouse antiserum.

Biotinylated anti-mouse IgG.

Streptavidin-peroxidase or Streptavidin conjugated to CY2, Cy3, Cy5, or other fluorescent dyes.

Peroxidase substrate (e.g. Diaminobenzidine(HCl) and H2O2).

Ethanol and Xylol.

Mounting medium (e.g. Eukitt for immunhistochemistry, Hydromount for immunofluorescence).

Method

 

Apply the SWant mouse-antiserum diluted 1:1'000-1:5'000 (paraffin sections) or 1:5'000-1:10'000 (floating sections) in TBS with 10% carrier serum (e.g. calf or horse serum) and eventually 0.2% Triton-X 100 (particularly for vibratome sections). Incubate for 1 to 3 days at 4°C (on a shaker for free-floating sections, in a humid chamber for paraffin sections).

Rinse in TBS 3 x 5 min.

Apply biotinylated anti-mouse IgG-biotin (diluted according to the suggestions of the supplier) in TBS with 10% carrier serum. Incubate at room temperature (RT) for 1 to 4 hours.

Rinse in TBS 3 x 5 min.

Apply the streptavidine-biotin-peroxidase complex (diluted according to the suggestions of the supplier) or the Streptavidine-fluorescent complex in TBS with 10% carrier serum. Incubate for 1 to 2 hours at RT.

Rinse in TBS 3 x 5 min.

The immunofluorescent labelling is terminated at this point and the section can be mounted on slides and coverslipped with an aqueous medium (e.g. Hydromount).

The immunohistochemical reaction is concluded by treating the section with a peroxidase substrate (e.g. Diaminobenzidine HCl / H2O2 ) under continuous microscopic observation.

Rinse in TBS 3 x 5 min.

Mount free floating sections on slides, eventually counterstain with cresyl-violet.

Dehydrate immunohistochemically treated sections with ethanol and xylol. Add mounting medium (Eukitt) and coverslip.

Note : in case of excessive background-staining, use higher dilutions of the SWant mouse antiserum.

 

* Without prior fixation the highly soluble Ca2+-binding proteins are immediately lost during sectioning.